oversized injector lines

[jwatso8]

do they make over sized, preformed injector lines for the VE pumps? thanks

[ford69557ci]

Ya gotta have them custom made. i had a local shop do mine and they leaked and didnt fit right. I think columbus diesel can make them for you but they might be kinda expensive.

[ZSkibo]

PDR will make them for like $350 or so, stainless or mild steel. Just be aware that they will retard your timing so be prepared to jump a tooth to get back to where you were prior to install. I'm wanting a set of .093's to go with my 5x18's when they come in. I've also heard that the stainless lines are more prone to cracking than the mild steel versions.

[ford69557ci]

Unless you are running a heavy modded 14mm pump, big sticks, and tryin to spin a bunch of rpm they are pretty much a waste if time. On my old 12mm pump they made a erratic idle.

[Frosty828]

a lopy eratic idle?

[jwatso8]

ZSkibo

be sure and tell me if you would, how you like your 5x18 injectors. i was thanking of sending in my stock injectors to get EDM's to 5x18. or going to buy some 6x16's. where are you getting them from? thanks.

i thank ill just wait untill i get my 14mm head and the larger injectors and the twins

[bgilbert]

I'd spend the money somewhere else. I don't have them, and don't intend on buying any.

[ford69557ci]

Yeah it was kinda of a lope but nothin like the monster pumps and the vp trucks

[dpuckett]

If you want bigger lines (at least on an IC'd truck) you can get a set of nonIC lines- I think they are 0.1mm or so bigger in diameter. That could be part of the reason the Big Power trucks started out sans intercooler.

DP