Injector nozzle size?

[Mark Nixon]

I have some injectors here with a nozzle number not listed in the injector thread.
The numbers on the nozzles are 9492 and I'm curious about the number of holes and their sizes.
The application they were from is a 300 horse 5.9 12 valve.

If anyone can help, I'd appreciate it!

Mark.

[oldestof11]

Know how many holes?

Also, VE 5.9L and P-pump 5.9L would have different holes, no? Higher injection pressures, etc. I know 2nd gen stock 160hp injectors have smaller holes.

[Mark Nixon]

Can't see the number of holes and it's a P-3000 application.
I know the pressures are 240 bar.

Mark.

[Smokem1]

Need the nozzle number. Or you could send them to me and I could tell you what they are.

[Mark Nixon]

The numbers are 9492.
Same numbers are in the main posting.

Mark.

[Smokem1]

No, the DLLA-P or DSLA-P number from the nozzle.

[Mark Nixon]

Well, dangit!

KDAL 59 P6 081 26

Mark.

[KTA]

Mark he is referring to a number you cant see without screwing the injector apart.

[Mark Nixon]

I finally figured that out and was looking for wrenches when you replied, KTA.

The internal number is: DLLA145P 574

Mark.

[Smokem1]

There you go. #0433171435 5x0.010" 145° mini sac nozzle with emission style pintle.

[Mark Nixon]

So it's basically sized like a 215HP nozzle for a P-pumper.
Too bad one got bit by a valve.

Thank You for the information, Smokem!!!

Mark.

[Smokem1]

I probably have 30-40 used nozzles of that type laying around, but they are typically more work than they are good for once they have miles on them.