potential of non I/C injectors?

How to make it go fast

Moderators: Greenleaf, KTA, BC847, Richie O

potential of non I/C injectors?

Postby wicked_stenH » Tue May 10, 2011 10:37 pm

whats the highest hp/tq recorded with stock non intercooled injectors on fuel only?
wicked_stenH
fuel screw!!!!
 
Posts: 26
Joined: Sat Oct 09, 2010 11:16 am

Re: potential of non I/C injectors?

Postby ciamcoop » Wed May 11, 2011 4:11 am

I remember a guy on cf saying he put down 718 lb/ft with his tires slipping on the dyno.
'93 W250LE 4x4 club cab, getrag, denny t, 366 spring, 181/210 cam, bored. 020, KDP, 5x.014's, piston pump, 4" tbe, cold air, 255/85/16s, 3.54's one wheeler peeler
User avatar
ciamcoop
fuel screw!!!!
 
Posts: 142
Joined: Sun Jun 13, 2010 11:35 pm
Location: Central Point, OR

Re: potential of non I/C injectors?

Postby Richie O » Wed May 11, 2011 9:17 am

With a standard you going to be around 350 horses on a maxed setup. I run 297 on mine through a stock auto.
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Re: potential of non I/C injectors?

Postby bgilbert » Wed May 11, 2011 1:40 pm

Richie O wrote:With a standard you going to be around 350 horses on a maxed setup. I run 297 on mine through a stock auto.

What he said. Oldcool90 did something like 357hp, 750+-ftlbs. 5 speed getrag, 62/65/12, nonIC injectors.
Bill Gilbert
85 D350 crew with 90 6BT intercooled Getrag 3.07's
93 D350 single cab Getrag 3.54's.
bgilbert
14mm rotor
 
Posts: 2253
Joined: Wed Jan 03, 2007 5:04 pm
Location: Terre Haute, Indiana
Top

Re: potential of non I/C injectors?

Postby wicked_stenH » Sun May 15, 2011 12:14 pm

that's better than I thought, hopefully I can get close to those numbers on the dyno.
wicked_stenH
fuel screw!!!!
 
Posts: 26
Joined: Sat Oct 09, 2010 11:16 am
Top


Return to The good stuff

Who is online

Users browsing this forum: No registered users and 80 guests

cron