INJECTOR CHART

How to make it go fast

Moderators: Greenleaf, KTA, BC847, Richie O

INJECTOR CHART

Postby DTanklage » Sat Oct 20, 2007 8:08 am

stock 1st gen inj - 6x.009" = .000380" total cross sectional area

non ic inj - 4x.013 = .000531 ( larger than ic inj)

2nd gen inj - these vary depending on model

160 hp- 5x .008

175 hp 5x .009

180 hp 5x.009

215 hp - 5x.010 (0.000393)



185's = smaller than stock

190's = smaller than stock

230's = ?

300's = 4x.014

ddp stg III = 50 LPM (liter per minute) 5 hole extrude hone inj

330's - 5x.011 = .000474 (20% larger than stock)

2nd gen 370's - 5x.012 = .000565 (48% larger than stock)

ddp stg IV = 55 LPM (only 10% larger than stg III's) 5 holes <.013

ddp stg 4plus = approx 65 lpm

ddp comp = 73+ lpm

pods - 4x.015 = .000707 (% larger than stock)

2nd gen 435's - 5x014 = .000769 (twice as large as stock)


custom injectors -

6x13 = .000795

5x15 = .000882

6x14 = .000923

5x16 = .001005

6x15 = .001059

5x17 = .001134 (300% larger than stock)

6x16 = .001206

5x18 = .001272

6x17 = .001360

5x19 = .001416

6x18 = .001526 (400% larger than stock)

5x20 = .001570

6x20 = .001884 (500% larger than stock)

5x22 = .001900

5x24 = .002261

6x22 = .002280 (600% larger than stock)

competition p-7100 injector 5x25 = .002459 (freg↓n huge)

ind inj super dragon flows (10 hole) - 5x10.5 + 5x18


please post the sizes for the tips that are in question (if you know them)

thanks
Last edited by DTanklage on Sat Sep 12, 2009 4:32 pm, edited 25 times in total.
User avatar
DTanklage
14mm rotor
 
Posts: 1183
Joined: Tue Sep 18, 2007 3:56 pm
Location: huntington beach

Postby CumminsPride » Sat Oct 20, 2007 9:41 am

New Era 435's= 5x.014
06 3500 AT Mega Cab SRW 4X4
User avatar
CumminsPride
fuel screw!!!!
 
Posts: 457
Joined: Sun Sep 16, 2007 8:31 am
Location: East Central IN

Postby ford69557ci » Mon Oct 29, 2007 10:59 am

Im goin to have some 6x20's done how much over stock is that?
92 w250, NV4500, D80, maxed pump, AFC gone, extended fuel screw, more to come.
User avatar
ford69557ci
14mm rotor
 
Posts: 897
Joined: Mon Jun 18, 2007 4:36 pm
Top

Postby DTanklage » Mon Oct 29, 2007 11:41 am

look at the chart aaron -

they are 5 times as big as stock

lol
slowass 2nd gen - ADRL pro mod bike #798 - 4.26 @ 175 mph (1/8m) - how quick do you wanna go?
User avatar
DTanklage
14mm rotor
 
Posts: 1183
Joined: Tue Sep 18, 2007 3:56 pm
Location: huntington beach
Top

Postby DTanklage » Mon Oct 29, 2007 11:43 am

ps - that should be good for about 800 hp if your unit is big enough to burn it all

forgot to ask you what size jets you are running with the stg 4's???
slowass 2nd gen - ADRL pro mod bike #798 - 4.26 @ 175 mph (1/8m) - how quick do you wanna go?
User avatar
DTanklage
14mm rotor
 
Posts: 1183
Joined: Tue Sep 18, 2007 3:56 pm
Location: huntington beach
Top

Postby ford69557ci » Mon Oct 29, 2007 12:42 pm

i think im gonna need biger turbo steup than the s300 s400 setup i had planed on. maybe a 5k aurora and a s500 series
92 w250, NV4500, D80, maxed pump, AFC gone, extended fuel screw, more to come.
User avatar
ford69557ci
14mm rotor
 
Posts: 897
Joined: Mon Jun 18, 2007 4:36 pm
Top

Postby cummins king » Sat Nov 03, 2007 6:53 pm

is there a calculation to figuar out the total cross sectional area of an injector, with the admount of holes and size o holes
93 4X4 auto
User avatar
cummins king
14mm rotor
 
Posts: 1741
Joined: Wed Aug 01, 2007 5:35 pm
Location: oakville, ontario, canada
Top

Postby gman07 » Sat Nov 03, 2007 7:40 pm

A= pi r squared

Area of one hole * number of holes = total area

3.14*((1/2 diameter)^2) * number of holes


For example, stock 6x.009:

3.14*((0.5*.009)(0.5*.009)) * 6

= 0.000382

Or if you wanted to be more accurate you could use 3.14159265358979323846264338327950288419... for pi. :P
1992.5 W250 pump tweaked, straight pipe, gauges, 3200 Gov. spring, AFC lever partially ground, timed at 1/8", Fuel pin ground, BHAF, HTT Stage IV H1C/E 60/12wg (ported), Transgo shift kit, KDP clothes-hangered, 202,000 miles - 36psi, 1250°
gman07
fuel screw!!!!
 
Posts: 81
Joined: Sun Jan 07, 2007 10:06 pm
Location: The "nose" of Iowa
Top

Postby DTanklage » Mon Nov 05, 2007 12:21 pm

who makes 8 hole injectors?

don
slowass 2nd gen - ADRL pro mod bike #798 - 4.26 @ 175 mph (1/8m) - how quick do you wanna go?
User avatar
DTanklage
14mm rotor
 
Posts: 1183
Joined: Tue Sep 18, 2007 3:56 pm
Location: huntington beach
Top

Postby DTanklage » Mon Nov 05, 2007 12:39 pm

gman07 wrote:
A= pi r squared

Area of one hole * number of holes = total area

3.14*((1/2 diameter)^2) * number of holes


For example, stock 6x.009:

3.14*((0.5*.009)(0.5*.009)) * 6

= 0.000382

Or if you wanted to be more accurate you could use 3.14159265358979323846264338327950288419... for pi. :P



when i figure them i find the Rsquared part first, then multiply by 3.14159, then multiply by the number of holes

iow for 8 by 11 ▬ 11/2=.0055; .0055x.0055=.0000302; .0000302 x 3.14159 = .0000948; times # of holes 8 = .000758" (i drop the 4 and only go out 6 places)

don
slowass 2nd gen - ADRL pro mod bike #798 - 4.26 @ 175 mph (1/8m) - how quick do you wanna go?
User avatar
DTanklage
14mm rotor
 
Posts: 1183
Joined: Tue Sep 18, 2007 3:56 pm
Location: huntington beach
Top

Postby cummins king » Mon Nov 05, 2007 3:54 pm

edge products does, but they dont make them for our year, unless you get them costom and they smoke like crasy so i was told
93 4X4 auto
User avatar
cummins king
14mm rotor
 
Posts: 1741
Joined: Wed Aug 01, 2007 5:35 pm
Location: oakville, ontario, canada
Top

Postby ford69557ci » Mon Nov 05, 2007 4:55 pm

seems like 6 hole seem to run the cleanest on 12v
92 w250, NV4500, D80, maxed pump, AFC gone, extended fuel screw, more to come.
User avatar
ford69557ci
14mm rotor
 
Posts: 897
Joined: Mon Jun 18, 2007 4:36 pm
Top

Postby BC847 » Mon Nov 05, 2007 5:09 pm

FYI: ref ~ The DDP4 1st Gen injectors.

I talked with the fellas at DDP today regarding the DDP4s for the 1st gens and had no luck in getting the actual orifice size. Also, the older versions run five orifices where as the newer now run four orifices.
David

1993 12mm VE Fueled W250 CC, Green
12.67 @ 103.35
Your basic farm truck ;)
BC847
Administrator
 
Posts: 2203
Joined: Wed Jan 03, 2007 5:22 pm
Top

Postby DTanklage » Mon Nov 05, 2007 6:07 pm

they are small

much smaller than 014

all i know is that they flow 55 liters per minute compared to the stg III's 50 lpm - and both are smaller than pods

with the ve being such a small pump i dont know why they didnt take em out a ways further and make them bigger than pods?

its not like we can make the pump push a bunch of fuel to make hp

we cant

have to do it with big injectors
slowass 2nd gen - ADRL pro mod bike #798 - 4.26 @ 175 mph (1/8m) - how quick do you wanna go?
User avatar
DTanklage
14mm rotor
 
Posts: 1183
Joined: Tue Sep 18, 2007 3:56 pm
Location: huntington beach
Top

Postby ford69557ci » Mon Nov 05, 2007 7:36 pm

like some 6x22 or 24 lol
92 w250, NV4500, D80, maxed pump, AFC gone, extended fuel screw, more to come.
User avatar
ford69557ci
14mm rotor
 
Posts: 897
Joined: Mon Jun 18, 2007 4:36 pm
Top

Next

Return to The good stuff

Who is online

Users browsing this forum: No registered users and 10 guests

cron