Good source for 155* nozzles?

How to make it go fast

Moderators: Greenleaf, KTA, BC847, Richie O

Good source for 155* nozzles?

Postby Joecochrane » Fri Jan 17, 2014 10:30 pm

I'm in the market for bigger nozzles but all I see is 145's running a industrial motor out of a bus looked up the cpl and it states I have non egr pistons. But any where such as dap or ebay or any place I look only has nozzles for the 145 spray pattern. I don't wanna buy full injectors because I have a p pump and most of the parts for the swap on a shelf. I just wanna make a ill power until I'm ready to rip the truck apart.
The driver 02 2500 ho 6 speed 2wd lil lift 35s edge cts hot some injectors and a fass

The toy 87 f350 39.5 tires 180 bus motor 727 trans maxed pump ground pin bumped timing 366 spring hx35 and a lot more in the works.
Joecochrane
fuel screw!!!!
 
Posts: 69
Joined: Thu Jan 16, 2014 9:21 am

Re: Good source for 155* nozzles?

Postby RCCUMMINS89 » Sat Jan 18, 2014 2:48 am

Pm me with what you are looking for.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID


Return to The good stuff

Who is online

Users browsing this forum: No registered users and 13 guests