New parts (again) - 62FMW review update
Moderators: Greenleaf, KTA, BC847, Richie O
18 posts
• Page 2 of 2 • 1, 2
Re: New parts (again) - 62FMW review update
by RCCUMMINS89 » Mon Jan 20, 2014 6:24 pm
Correct..... 5x14 SAC that have been flowed (extruded) with 3 flows, flowing 77lpm. Also have a very mild .05 of pintle lift and popped at 255 bar.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
- RCCUMMINS89
- 14mm rotor
- Posts: 4826
- Joined: Mon Oct 03, 2011 4:19 pm
- Location: Spirit Lake, ID
Re: New parts (again) - 62FMW review update
by BILTIT » Tue Jan 21, 2014 8:27 am
Does this new turbo have the compressor outlet the same as 351cw or no?
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
-
BILTIT - 14mm rotor
- Posts: 711
- Joined: Wed Aug 11, 2010 1:29 pm
- Location: Lloydminster, Saskatchewan