Bae turbo hx45?

How to make it go fast

Moderators: Greenleaf, KTA, BC847, Richie O

Bae turbo hx45?

Postby Dan NJ » Wed Sep 10, 2014 8:47 am

http://baeturbosystems.com/HX45turbocharger.aspx

I was screwing around and stumbled across this....pretty crazy anyone ever run one on their truck? Website has a Vid of a common rail running it as a single.
Dan NJ
fuel screw!!!!
 
Posts: 46
Joined: Sat Sep 06, 2014 7:19 pm

Re: Bae turbo hx45?

Postby PToombs » Wed Sep 10, 2014 4:27 pm

Only 600 bucks but you need the turbine housing too.
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11367
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!

Re: Bae turbo hx45?

Postby RCCUMMINS89 » Wed Sep 10, 2014 4:51 pm

My bet is a surging mo fo.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: Bae turbo hx45?

Postby Dan NJ » Thu Sep 11, 2014 8:17 am

PToombs wrote:Only 600 bucks but you need the turbine housing too.


Yea they sell the housing separate but 67mm you could make some serious power on a single without massive injectors I'd think. Like a 14 cm would be awesome
Dan NJ
fuel screw!!!!
 
Posts: 46
Joined: Sat Sep 06, 2014 7:19 pm
Top

Re: Bae turbo hx45?

Postby Dan NJ » Thu Sep 11, 2014 8:18 am

If I had the extra money to waste I'd test one out hahaha
Dan NJ
fuel screw!!!!
 
Posts: 46
Joined: Sat Sep 06, 2014 7:19 pm
Top

Re: Bae turbo hx45?

Postby oldestof11 » Thu Sep 11, 2014 2:57 pm

67 can flow massive air, like 800hp worth. Not worth it for our trucks as we cant make that much power to utilize as a single yet.
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois
Top


Return to The good stuff

Who is online

Users browsing this forum: No registered users and 19 guests