4x4 frame

How to make it go fast

Moderators: Greenleaf, KTA, BC847, Richie O

4x4 frame

Postby 92cummins89 » Fri Feb 09, 2018 9:24 pm

Iā€™m looking at buying a donor truck that is 2wd an I have a 4wd do they have the same frame ?
1992 4x4, 4ā€ diamond eye exhaust, nv4500, he351cw
92cummins89
fuel screw!!!!
 
Posts: 179
Joined: Sat Sep 14, 2013 8:46 pm

Re: 4x4 frame

Postby thrashingcows » Sat Feb 10, 2018 2:58 pm

The frames are the same as long as it's a cummins truck, but you will have to cut/grind/drill/pound out all the cold rivets on both frames, then measure and drill all the 4wd relevant holes in the frame, then swap all the 4wd components over to the 2wd frame....easy, done in an afternoon. :?
1984/93 Dodge Crewcab, W350, 1 Ton SRW, long box, 330K Km's, M&H spacer, 366 spring, fuel pin to deep side, 14cm housing, Piston LP, PS IC, Isspro Boost, Pyro and tach, NV4500, 29 spline NP205, 3.54's.


Check out the build....http://www.dieseltruckresource.com/dev/ ... 05923.html
thrashingcows
14mm rotor
 
Posts: 575
Joined: Wed Nov 02, 2011 12:00 am

Re: 4x4 frame

Postby 92cummins89 » Sun Feb 11, 2018 9:25 pm

Well was gonna buy it but was too late o well
On mine I need two strip mine down to the frame bc the previous owner Bent the sthi outta that piece of flat brace An I need to go back in an fix it right
1992 4x4, 4ā€ diamond eye exhaust, nv4500, he351cw
92cummins89
fuel screw!!!!
 
Posts: 179
Joined: Sat Sep 14, 2013 8:46 pm
Top

Re: 4x4 frame

Postby erroljon » Thu Apr 26, 2018 11:40 pm

Haven't you look for another option?
erroljon
 
Top


Return to The good stuff

Who is online

Users browsing this forum: No registered users and 11 guests

cron