Scheid Diesel

How to make it go fast

Moderators: Greenleaf, KTA, BC847, Richie O

Scheid Diesel

Postby cougar » Sat Mar 31, 2018 10:26 am

Any thoughts or comments on their Lightning100015 12MM 4000RPM VE Pump?
RIP 91.5 W250 5 speed. The great experiment.
92 W250 HD 47RH with Compushift. Upgraded H1C to 60/60/16, modified fuel pin, and DAP 7X.010 injectors.
01 2500 "the work truck".
cougar
14mm rotor
 
Posts: 902
Joined: Sat Apr 18, 2009 3:31 pm
Location: The Valley of no concern, AK

Re: Scheid Diesel

Postby RCCUMMINS89 » Thu Apr 12, 2018 5:49 pm

They put out a decent amount of fuel, but they remove the dynamic timing of the pump, by pinning it.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4825
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID

Re: Scheid Diesel

Postby Remps » Sun Apr 15, 2018 7:10 am

I thought they only pinned the 14, they pin the 12 as well?
'90 D250 R/C,727,IC,6x.009's,1/8" bump,fuel psi,straight pipe w/5" stack.
'90 W250 R/C,47rh,K@N,HX35,1/8" bump,2nd gen IC,boost,egt,trans temp.3.07's.
'96 2500 S/C L/B,2wd,NV5600,3.54 L/S,cai,egt,pacbrake,mbrp exhaust,10 plate.
Bring back the Bank of Canada, PRE- 1974.
User avatar
Remps
14mm rotor
 
Posts: 1094
Joined: Sun May 03, 2009 12:57 am
Location: Saskatchewan
Top

Re: Scheid Diesel

Postby RCCUMMINS89 » Sun Apr 15, 2018 9:57 am

Yes.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4825
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: Scheid Diesel

Postby cougar » Fri Apr 20, 2018 10:53 am

I got one and had it installed at a local performance diesel shop. Apparently mine isn't pinned. It came without a KSB, so I asked them about it. They said to transfer my old one over to it. Works as advertised. And yes, it does put out a decent amount of fuel. Better throttle response and less turbo lag, but I think that is because the old IP was in sad shape. Normal driving and cruise are no different looking at boost and EGT numbers. The difference comes in when you mash the peddle. I'll need to change my boost gauge and maybe add water injection.
RIP 91.5 W250 5 speed. The great experiment.
92 W250 HD 47RH with Compushift. Upgraded H1C to 60/60/16, modified fuel pin, and DAP 7X.010 injectors.
01 2500 "the work truck".
cougar
14mm rotor
 
Posts: 902
Joined: Sat Apr 18, 2009 3:31 pm
Location: The Valley of no concern, AK
Top

Re: Scheid Diesel

Postby RCCUMMINS89 » Fri Apr 20, 2018 11:00 am

They still put a ksb on it. However, how do you know your ksb is still changing timing?
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4825
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: Scheid Diesel

Postby cougar » Sat Apr 21, 2018 8:34 am

By the change in engine sound when I jumper it to the battery.
RIP 91.5 W250 5 speed. The great experiment.
92 W250 HD 47RH with Compushift. Upgraded H1C to 60/60/16, modified fuel pin, and DAP 7X.010 injectors.
01 2500 "the work truck".
cougar
14mm rotor
 
Posts: 902
Joined: Sat Apr 18, 2009 3:31 pm
Location: The Valley of no concern, AK
Top

Re: Scheid Diesel

Postby RCCUMMINS89 » Sun Apr 22, 2018 7:33 pm

Maybe they stopped doing all of them. I was told straight from them they do it on all maxed out pumps. Everyone I have personally seen is as well. What they do is not actually pin it, but they add so much shim that the piston can't really move.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4825
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top


Return to The good stuff

Who is online

Users browsing this forum: No registered users and 3 guests