1stGen.org

THE place for 1st gens

Skip to content

Lift Pump?

How the engine works

Moderators: Greenleaf, KTA, BC847, Richie O

Post a reply

Re: Lift Pump?

Postby BILTIT » Mon Oct 15, 2012 5:55 am

Message RCCUMMINS89, he sells a pump that will work best for you.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: Lift Pump?

Postby RCCUMMINS89 » Mon Oct 15, 2012 6:59 pm

Thank you sir
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: Lift Pump?

Postby Billy Bones » Sat Oct 20, 2012 10:56 am

Ok so I'll be in the same boat but I'm to new to PM is there any way other cantact or place to purchase one?
Billy Bones
fuel screw!!!!
 
Posts: 41
Joined: Sun Sep 04, 2011 12:27 pm
Location: Marysville Wa
Top

Re: Lift Pump?

Postby RCCUMMINS89 » Sat Oct 20, 2012 12:44 pm

If you mean from me, you can give me a txt or call at 208-215-5659, my name is Eric

My add is in member endeavors
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: Lift Pump?

Postby RCCUMMINS89 » Tue Oct 30, 2012 1:51 pm

Billy Bones wrote:Ok so I'll be in the same boat but I'm to new to PM is there any way other cantact or place to purchase one?



Also you can now visit http://www.thehungrydiesel.com/
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: Lift Pump?

Postby Farmboy » Wed Oct 31, 2012 9:30 am

Got the LP from RC.. everything that was expected.. and good customer service to boot. All installed and running beautifully.
1990 W350 4X4 NOW INTERCOOLED 5-speed. Boost/Pyro. Few light tweaks to the pump. Now a dually with an aluminum flatbed!!
User avatar
Farmboy
14mm rotor
 
Posts: 620
Joined: Wed Dec 17, 2008 11:47 am
Location: Between the corn fields of Ohio
Top

Re: Lift Pump?

Postby RCCUMMINS89 » Wed Oct 31, 2012 1:41 pm

:wink: Good to hear, thanks again.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top
Previous
Post a reply

Return to Engine

Who is online

Users browsing this forum: No registered users and 50 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group