Free super duty 7.3 turbo

How to make it go fast

Moderators: Greenleaf, KTA, BC847, Richie O

Free super duty 7.3 turbo

Postby spencerdiesel » Thu Apr 28, 2016 7:54 am

I'm seriously doubting there's anything I can do with it........but anyone know for sure?
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC

Re: Free super duty 7.3 turbo

Postby 79Powerwagon » Thu Apr 28, 2016 8:03 am

If it means anything I used a ATS 3k from a superduty on my old 1st gen.
1979 Dodge Warlock, I/C 12v, 518, TCS89% Converter, 6x13 injectors, HE351cw, Piston lp
79Powerwagon
fuel screw!!!!
 
Posts: 295
Joined: Thu Jan 07, 2016 8:59 am

Re: Free super duty 7.3 turbo

Postby 79Powerwagon » Thu Apr 28, 2016 8:05 am

Looks like the factory charger is a different setup though

Anything can be done....
1979 Dodge Warlock, I/C 12v, 518, TCS89% Converter, 6x13 injectors, HE351cw, Piston lp
79Powerwagon
fuel screw!!!!
 
Posts: 295
Joined: Thu Jan 07, 2016 8:59 am
Top

Re: Free super duty 7.3 turbo

Postby spencerdiesel » Thu Apr 28, 2016 8:20 am

That's what I'm wondering, how extensive would flange modification need to be etc
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Re: Free super duty 7.3 turbo

Postby 79Powerwagon » Thu Apr 28, 2016 9:57 am

I don't think it would be worth the effort....plus, it's a Ford part!! :shock:
1979 Dodge Warlock, I/C 12v, 518, TCS89% Converter, 6x13 injectors, HE351cw, Piston lp
79Powerwagon
fuel screw!!!!
 
Posts: 295
Joined: Thu Jan 07, 2016 8:59 am
Top

Re: Free super duty 7.3 turbo

Postby spencerdiesel » Thu Apr 28, 2016 12:18 pm

Junk! :lol: ill probably make it shiny and sell it. Or use as a nice paperweight
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Re: Free super duty 7.3 turbo

Postby DMan1198 » Thu Apr 28, 2016 6:39 pm

Iirc those chargers are Garrett gtp37's, or 38's, or something like that. Not a very big compressor, but the turbine is sized decent for a 5.9. The housing on the other hand I think has a v-band inlet. Best to sell it, or make a lamp out of it
Ducati- professional nap taker, and thread derailer extraordinaire
Brownie: 80 dodge heavy half. Ghost cummins under the hood, and some sinister plans
The Roo Hunter: 93 w250, lifted, 2 whistle machines, and a bunch of other go fast goodies, uhh..... not there yet
Jaeger: 12 ram 3500. Lifted, exhausted, and fed an excessive quantity of air
The Huntress: 02 Jetta TDI. No muffler, egr, horsepower
DMan1198
14mm rotor
 
Posts: 2254
Joined: Sat Aug 10, 2013 6:26 am
Location: Slave Lake, Alberta
Top

Re: Free super duty 7.3 turbo

Postby spencerdiesel » Sat Apr 30, 2016 5:58 pm

Well that'll be what I do then, I guess it makes sense that an oval flange is for up pipes and not my exh manifold :D
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Re: Free super duty 7.3 turbo

Postby DMan1198 » Sun May 01, 2016 11:37 am

Sell it, or the lamp part?
Ducati- professional nap taker, and thread derailer extraordinaire
Brownie: 80 dodge heavy half. Ghost cummins under the hood, and some sinister plans
The Roo Hunter: 93 w250, lifted, 2 whistle machines, and a bunch of other go fast goodies, uhh..... not there yet
Jaeger: 12 ram 3500. Lifted, exhausted, and fed an excessive quantity of air
The Huntress: 02 Jetta TDI. No muffler, egr, horsepower
DMan1198
14mm rotor
 
Posts: 2254
Joined: Sat Aug 10, 2013 6:26 am
Location: Slave Lake, Alberta
Top

Re: Free super duty 7.3 turbo

Postby spencerdiesel » Tue May 03, 2016 12:31 pm

Off frame lamp conversion then sell it ;)
1992 W250, 5 speed, 4.10, Ext. cab Ext. bed, 12.5k winch, 75 gal. fuel tank

H1C/18

Fuel: THD 6x10 VCO sticks, THD 12 psi piston pump, THD fuel pin, 366 spring, fuel screw 2 turns in, timing to the head/ >1/4”
Muffler delete

Minimum 60% WMO full time since Sep. 2018
spencerdiesel
14mm rotor
 
Posts: 1106
Joined: Tue Oct 27, 2015 4:02 pm
Location: Brevard, NC
Top

Re: Free super duty 7.3 turbo

Postby DMan1198 » Wed May 04, 2016 3:04 pm

There you go. Best of both worlds
Ducati- professional nap taker, and thread derailer extraordinaire
Brownie: 80 dodge heavy half. Ghost cummins under the hood, and some sinister plans
The Roo Hunter: 93 w250, lifted, 2 whistle machines, and a bunch of other go fast goodies, uhh..... not there yet
Jaeger: 12 ram 3500. Lifted, exhausted, and fed an excessive quantity of air
The Huntress: 02 Jetta TDI. No muffler, egr, horsepower
DMan1198
14mm rotor
 
Posts: 2254
Joined: Sat Aug 10, 2013 6:26 am
Location: Slave Lake, Alberta
Top


Return to The good stuff

Who is online

Users browsing this forum: No registered users and 14 guests