Tires sizes???

everything but the drivetrain

Moderators: Greenleaf, BC847, Richie O

Tires sizes???

Postby VEfreak » Wed Apr 15, 2009 2:50 pm

Will 245/75/r16 fit on our stock rims? Is there a list somewhere that shows what will fit on our truck.
I AM ZUES DAMNIT
User avatar
VEfreak
fuel screw!!!!
 
Posts: 185
Joined: Thu Mar 13, 2008 7:09 pm
Location: Foresthill

Postby mprmn08 » Wed Apr 15, 2009 5:44 pm

thats basicly a 31x11 so it should. it will squeeze up to prolly about a 32 or 32.5 due the stock rim being only (if i remember correctly) about 8 inches wide but it should fit yes.
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI

Postby Ace » Wed Apr 15, 2009 7:22 pm

Actually, it's more like 30.5" tall, and the stock rims are 6" wide.

Stock tire size is 235/85 16, so it's about .4 wider and a full inch shorter than stock. Should fit fine, but the speedo will be reading around 2-3mph off at 65mph.
User avatar
Ace
14mm rotor
 
Posts: 1024
Joined: Thu May 31, 2007 2:10 am
Location: CO
Top

33's ?

Postby 92 red cummins » Tue Jul 07, 2009 4:08 pm

can I fit 33 inch tires with stock suspension and fenders ?
92 red 4x4 w250 dodge grille guard,KC lights,warn winch,hella fogs,advanced timing,k&n,
92 red cummins
fuel pin?
 
Posts: 18
Joined: Wed Jun 10, 2009 8:36 am
Location: tx
Top

Postby mprmn08 » Tue Jul 07, 2009 5:07 pm

thats what i got on mine right now is 33 x 11 and it fits fine. so i would say yes. unless i just happened to get lucky. and no i dont have a lift of leveling kit or anything.
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI
Top

Postby Swaggs » Sat Jul 18, 2009 2:28 pm

I got 285/75s (32.5x11) and they rub at full turn on the front of both wheel wells.. they are on a set of aftermarket 16x7 wheels im about to trade out for a set that is 10 inches wide.. we'll see what happens
92 W250 CTD, Getrag, hx35, DiamondEye, Mostly Stock
89 Ramcharger 360/727

'92 W250 CTD, Lifted Sold
'96 2500 CTD Sold
User avatar
Swaggs
fuel screw!!!!
 
Posts: 97
Joined: Sat Jan 24, 2009 10:36 am
Location: Michigan
Top

Postby mprmn08 » Sun Jul 19, 2009 11:22 am

ya my rims are 17 x 9 with 33 x 11 tires so who knows.
93 w250 reg cab. rigged up stock downpipe to 4 inch to 5 inch exhaust from p.o. mild pump tweaks and all other stock for now. Project "smoke a little smoke". www.c-techperformance.com
User avatar
mprmn08
14mm rotor
 
Posts: 507
Joined: Fri Apr 11, 2008 12:12 pm
Location: Grandville, MI
Top


Return to Chassis

Who is online

Users browsing this forum: No registered users and 43 guests

cron