Leveling kit for my 1993 cummins w250

everything but the drivetrain

Moderators: Greenleaf, BC847, Richie O

Leveling kit for my 1993 cummins w250

Postby crisdog80 » Thu Apr 08, 2010 9:44 pm

i want to know if there is a cheap leveling kit or if there is some easy mod to do my truck is really raked (it is tilted to the front looks like a sled puller)
smoke screw?
Posts: 2
Joined: Tue Jun 02, 2009 12:59 pm
Location: Fort Lupton, Colorado

Re: Leveling kit for my 1993 cummins w250

Postby BobS » Fri Apr 09, 2010 8:09 am

Our trucks were built from the factory with the front being lower than the rear. Now if your front springs are shot it will enhance the tilt. Normally the front springs set at near a level stance and the factory arching is not that much to begin with. Most of the 93 models came 6 inch tall blocks in the rear suspension which is taller than the pre-92 years. It may be cheaper and easier just to swap out the rear blocks with an earlier year if you really want it to set in a more level stance.

Just remember that a slightly overloaded truck stands out more and has a far better chance of being pulled over and weighed if the load causes the rear end to sag and appear more than normal. A truck with a level stance will appear to be overloaded when ever a heavy load is placed in the bed due to the fact that it normally sets level. I know two retired state police officers who have personally confirmed this as a fact.

Creating jobs is a byproduct of making a PROFIT!

91.5 W250 NV4500 Conversion
89 D350 Stock
92 W250 Crew Cab finally in progress
86 D150 wannabe 4BT http://4btswaps.com/
User avatar
14mm rotor
Posts: 639
Joined: Sat Jan 06, 2007 3:16 pm
Location: SW Pa - Greene County

Re: Leveling kit for my 1993 cummins w250

Postby Tintacker » Mon Apr 12, 2010 7:02 pm

The only way I could get my truck to ride nice and level was to fill the bed with fresh cut red oak.

That wasn't very practical for me so I bought some 2" skyjacker springs ($380) which leveled it out nicely. I haven't loaded her heavy since, so I don't know how it will look.

You do not have the required permissions to view the files attached to this post.
SOLD: :( '92 W250 LE auto PDR 190's, 3200 spring, Skyjacker 2" front springs with Bilstein 5100s

'01 2500 QC/SB 4X4 6sp, camper puller
User avatar
fuel screw!!!!
Posts: 86
Joined: Fri Aug 07, 2009 6:05 pm
Location: Atlanta, GA

Return to Chassis

Who is online

Users browsing this forum: No registered users and 3 guests