One Way to Install a Powerstroke Intercooler

Moderators: Greenleaf, BC847, Richie O

Re: One Way to Install a Powerstroke Intercooler

Postby BILTIT » Mon Mar 18, 2013 11:41 am

Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan

Re: One Way to Install a Powerstroke Intercooler

Postby CWT » Thu Apr 10, 2014 8:18 am

I was curious if anyone has done this swap in a 89-90 truck? All the threads ive found here and othe sites are all on I/C trucks with the late model grille. Ive been giving some thought to doing it but its going to take some major clearance to make it work it appears.
CWT
fuel screw!!!!
 
Posts: 26
Joined: Thu Apr 10, 2014 8:03 am

Re: One Way to Install a Powerstroke Intercooler

Postby BILTIT » Thu Apr 10, 2014 9:19 am

It has been said the 2nd gen intercooler fits a bit better on the earlier models.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: One Way to Install a Powerstroke Intercooler

Postby CWT » Thu Apr 10, 2014 12:28 pm

True but with the ac condenser there is only like 1-2" between the back of the grille and the condenser.
CWT
fuel screw!!!!
 
Posts: 26
Joined: Thu Apr 10, 2014 8:03 am
Top

Re: One Way to Install a Powerstroke Intercooler

Postby dazedandconfused » Thu Apr 10, 2014 1:22 pm

You have yo do some trimming/sanding on the back of the grille.
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky
Top

Re: One Way to Install a Powerstroke Intercooler

Postby CWT » Thu Apr 10, 2014 2:30 pm

Have you done this? Just trying to make up my mind to swap to late model grille or fix what I have to work. Just don't want it to look like poo.
CWT
fuel screw!!!!
 
Posts: 26
Joined: Thu Apr 10, 2014 8:03 am
Top

Re: One Way to Install a Powerstroke Intercooler

Postby dazedandconfused » Thu Apr 10, 2014 3:15 pm

Not yet but I know a few on here run the old style grille and intercooler. I'm pretty sure Caleb runs the 2nd gen cooler.
Big Andy
1983 Dodge D150 that has been repowered with a 93 Cummins/518 running gear AKA The Ugly Duck! I would much rather build them then buy them.[
User avatar
dazedandconfused
14mm rotor
 
Posts: 6119
Joined: Thu Apr 05, 2007 6:25 pm
Location: Walton, Kentucky
Top

Re: One Way to Install a Powerstroke Intercooler

Postby cmann250 » Thu Apr 10, 2014 6:01 pm

dazedandconfused wrote:I'm pretty sure Caleb runs the 2nd gen cooler.

True story ^^^

See here: viewtopic.php?f=4&t=13335&hilit=2nd+gen+IC
Caleb, Certified Shade Tree Mechanic Extraordinaire :mrgreen:
The 1stgen.org black sheep

"Whatever!" - Coach Jerry Smith
cmann250
14mm rotor
 
Posts: 4059
Joined: Fri May 20, 2011 5:25 pm
Location: Lafayette, IN
Top

Re: One Way to Install a Powerstroke Intercooler

Postby RumbleFish » Thu Apr 10, 2014 7:09 pm

Andrew has a condenser and ic behind his 90 grill.
User avatar
RumbleFish
14mm rotor
 
Posts: 2648
Joined: Thu Jan 11, 2007 1:19 pm
Location: Indiana
Top

Re: One Way to Install a Powerstroke Intercooler

Postby RCCUMMINS89 » Thu Apr 10, 2014 8:31 pm

I run the 2nd gen cooler on mine, with the newer style grill of course..... yea... go with the older style. I can't fit anything but the intercooler.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
RCCUMMINS89
14mm rotor
 
Posts: 4826
Joined: Mon Oct 03, 2011 4:19 pm
Location: Spirit Lake, ID
Top

Re: One Way to Install a Powerstroke Intercooler

Postby Ace » Tue Jan 11, 2022 6:37 am

I'm back, ready to answer any questions, but I'm not gonna write it again! ;)
User avatar
Ace
14mm rotor
 
Posts: 1024
Joined: Thu May 31, 2007 2:10 am
Location: CO
Top

Previous

Return to Cool projects YOU can do

Who is online

Users browsing this forum: No registered users and 1 guest

cron