KSB solenoid
Moderators: Greenleaf, KTA, BC847, Richie O
2 posts
• Page 1 of 1
KSB solenoid
by ABeach6882 » Sat Jan 25, 2014 11:30 pm
I'm new to the diesel scene and have recently purchased a 93 w250. The truck runs strong but the other day I noticed a slight leak coming from the line that connects to the top of the KSB solenoid. I tried to tighten it up but it was pretty snug. Its still leaking ( nothing major ) How can I fix this? Will this leak cause any issues? Thanks in advance for any insight you guys may be able to provide.
- ABeach6882
- smoke screw?
- Posts: 4
- Joined: Sat Jan 25, 2014 10:54 pm
Re: KSB solenoid
by RCCUMMINS89 » Sun Jan 26, 2014 9:20 am
The only issues it will cause is a fuel leak (annoying).
to fix it, try to take it off and try to tighten it back up...rarely it works, but sometimes.
Otherwise you will probably need a new line. Perhaps you'll get lucky and one of the folks will have an extra.
to fix it, try to take it off and try to tighten it back up...rarely it works, but sometimes.
Otherwise you will probably need a new line. Perhaps you'll get lucky and one of the folks will have an extra.
89 RC on shortened 92 diesel frame - NV4500 w/dual disc/4.10s on 37s. - Self built pump, "hot screw", lots of timing, True high volume low pressure lift pump, 62fmw/68/.7gated, 77lpm SAC Inj., Studs/O-rings,- 423/1220 Mustang - 11/16/2013 http://www.TheHungryDiesel.com full line dealer, if you don't see it please ask.
- RCCUMMINS89
- 14mm rotor
- Posts: 4826
- Joined: Mon Oct 03, 2011 4:19 pm
- Location: Spirit Lake, ID