1stGen.org

THE place for 1st gens

Skip to content

Build plan?

How to make it go fast

Moderators: Greenleaf, KTA, BC847, Richie O

Post a reply

Postby PToombs » Sun Feb 24, 2008 6:00 pm

Sure you can. You just have to get the low pressure one. I got mine new, gives 15-16 psi at idle.
Take it apart and measure the bore. Search on here, or ask, there is a thread with pics of the difference.
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11369
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Postby TWorline » Sun Feb 24, 2008 6:04 pm

Hey Pete I can understand that, seems like there could be some closet perverts around here. :shock:
Tim Worline
1992 W250 Club Cab LE, S300 62/71, 5" stainless intake, 4" into 5" exhaust, ATS exhaust manifold, SDX 5X18 Injectors, AirDog 150, Borgeson shaft, Coolingmist Vari-cool, Con OFEK, 3" Stainless CoolerTubz, 354/749.

http://www.CoolerTubz.com/
User avatar
TWorline
14mm rotor
 
Posts: 2480
Joined: Thu Jan 04, 2007 6:32 pm
Location: Continental, Oh.
Top

Postby PToombs » Sun Feb 24, 2008 6:12 pm

And some that aren't in the closet! :shock:
pete

Just enough power to break everything behind the crankshaft.
User avatar
PToombs
14mm rotor
 
Posts: 11369
Joined: Sun Jan 07, 2007 6:13 pm
Location: Syracuse NY. Snow central!
Top

Postby GO OVRIT » Sun Feb 24, 2008 7:11 pm

Get the sheep back....that guy makes me nervous. :geek:
92 W250 ext cab 518, big sticks, a-1000, PDR HX40, 4" exhaust w/aeroturbine, pump tweaked, K&N filter Tims Cooler tubes and 3" i/c, gauges
GO OVRIT
14mm rotor
 
Posts: 554
Joined: Tue Nov 13, 2007 8:59 pm
Location: Gloucester Va.
Top

Postby DTanklage » Sun Feb 24, 2008 7:59 pm

PToombs wrote:
Sure you can.



not without taking it apart and putting first gen parts in it

i shoulda said
slowass 2nd gen - ADRL pro mod bike #798 - 4.26 @ 175 mph (1/8m) - how quick do you wanna go?
User avatar
DTanklage
14mm rotor
 
Posts: 1183
Joined: Tue Sep 18, 2007 3:56 pm
Location: huntington beach
Top

Postby ryan10 » Mon Feb 25, 2008 4:12 am

Ok, thanks guys. I know about the regulator. How do i run a big line return line? i just want it to be big lines to the regulator. I dont wanna go all the way to the tank. How should i do it?
1993 w350 6" lift, 35" all terrains. fuel screw in as far as it will go, pump mods, bully dog injectors, bullydog fuel pin, 14cm wastegated housing, water/meth injection. Ground AFC foot, 3200 spring

soon to come: turbo upgrade.
ryan10
fuel screw!!!!
 
Posts: 37
Joined: Sun Sep 16, 2007 7:13 pm
Top

Postby ryan10 » Mon Mar 03, 2008 3:42 pm

Ok guys, well the final for now plan is set. I found out that my injectors are a 45 hp injector, and closer to a 190 than PODs, so today i sent out the check for a set of PODs from a member on this site. I also ordered a 2nd gen piston pump. I am going big lines from the piston pump to injector pump and will be running a regulator. i have a hx35 lined up for $150. should i buy it? Goal is for 800 ft lbs.
thanks.
1993 w350 6" lift, 35" all terrains. fuel screw in as far as it will go, pump mods, bully dog injectors, bullydog fuel pin, 14cm wastegated housing, water/meth injection. Ground AFC foot, 3200 spring

soon to come: turbo upgrade.
ryan10
fuel screw!!!!
 
Posts: 37
Joined: Sun Sep 16, 2007 7:13 pm
Top

Postby ford69557ci » Mon Mar 03, 2008 5:01 pm

hx35 with a 12cm housing will run to hot with pod's
92 w250, NV4500, D80, maxed pump, AFC gone, extended fuel screw, more to come.
User avatar
ford69557ci
14mm rotor
 
Posts: 897
Joined: Mon Jun 18, 2007 4:36 pm
Top

Postby ryan10 » Mon Mar 03, 2008 5:52 pm

Ok, so it will even be too hot for a play toy? I have water meth, i dont know if that will make enough of a difference in terms of keeping it cool?
thanks
1993 w350 6" lift, 35" all terrains. fuel screw in as far as it will go, pump mods, bully dog injectors, bullydog fuel pin, 14cm wastegated housing, water/meth injection. Ground AFC foot, 3200 spring

soon to come: turbo upgrade.
ryan10
fuel screw!!!!
 
Posts: 37
Joined: Sun Sep 16, 2007 7:13 pm
Top

Postby DTanklage » Mon Mar 03, 2008 6:00 pm

prolly work great for a toy
slowass 2nd gen - ADRL pro mod bike #798 - 4.26 @ 175 mph (1/8m) - how quick do you wanna go?
User avatar
DTanklage
14mm rotor
 
Posts: 1183
Joined: Tue Sep 18, 2007 3:56 pm
Location: huntington beach
Top

Postby DTanklage » Mon Mar 03, 2008 6:01 pm

(if ya do it ALL right)
slowass 2nd gen - ADRL pro mod bike #798 - 4.26 @ 175 mph (1/8m) - how quick do you wanna go?
User avatar
DTanklage
14mm rotor
 
Posts: 1183
Joined: Tue Sep 18, 2007 3:56 pm
Location: huntington beach
Top

Postby ryan10 » Mon Mar 03, 2008 6:04 pm

What do you mean by do it all right?
1993 w350 6" lift, 35" all terrains. fuel screw in as far as it will go, pump mods, bully dog injectors, bullydog fuel pin, 14cm wastegated housing, water/meth injection. Ground AFC foot, 3200 spring

soon to come: turbo upgrade.
ryan10
fuel screw!!!!
 
Posts: 37
Joined: Sun Sep 16, 2007 7:13 pm
Top

Postby DTanklage » Mon Mar 03, 2008 7:31 pm

xxxactly...
slowass 2nd gen - ADRL pro mod bike #798 - 4.26 @ 175 mph (1/8m) - how quick do you wanna go?
User avatar
DTanklage
14mm rotor
 
Posts: 1183
Joined: Tue Sep 18, 2007 3:56 pm
Location: huntington beach
Top

Postby ryan10 » Mon Mar 03, 2008 7:40 pm

Ok, not really following you here.......
1993 w350 6" lift, 35" all terrains. fuel screw in as far as it will go, pump mods, bully dog injectors, bullydog fuel pin, 14cm wastegated housing, water/meth injection. Ground AFC foot, 3200 spring

soon to come: turbo upgrade.
ryan10
fuel screw!!!!
 
Posts: 37
Joined: Sun Sep 16, 2007 7:13 pm
Top

Postby DTanklage » Mon Mar 03, 2008 8:12 pm

you could give two guys the same parts and they could both install them and tune them for their trucks that say still had the stock h1c on them

one guys truck would work great and the other guy would grenade his turbo
slowass 2nd gen - ADRL pro mod bike #798 - 4.26 @ 175 mph (1/8m) - how quick do you wanna go?
User avatar
DTanklage
14mm rotor
 
Posts: 1183
Joined: Tue Sep 18, 2007 3:56 pm
Location: huntington beach
Top
Previous
Post a reply

Return to The good stuff

Who is online

Users browsing this forum: No registered users and 51 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group