any Iowa guys around here?

Off topic/not diesel related

Moderators: Greenleaf, BC847, Richie O

any Iowa guys around here?

Postby IowaCummins » Sun Apr 26, 2009 9:38 pm

hey im in south western iowa in council bluffs right across the river from omaha. is there any 1st geners around me? i know pulltillbroke is over in eagle nebraska. anyone else?
1993 Dodge W250 Reg cab. Auto, .010" headgasket, A1 Studs. Just the Lil Ole VE pump Fuelin 7x.014's turnin the Aurora 3000 turbo. 5" Turbo back to Duals. :cbadge:
IowaCummins
14mm rotor
 
Posts: 522
Joined: Tue Mar 17, 2009 2:16 pm
Location: council bluffs iowa

Postby pulltilbroke » Mon Apr 27, 2009 12:08 pm

Do you know stillsmokin he's in Memphis NE, he hasn't been gettin on the forums in a while but I talk to him on a daily basis

I know a few other first genners around here but there not on the forums
90 W250 reg cab, Modified knuder valve, reversed reciprocting dinglearm adjusted, High volume flux capacitor,upgraded whirlygig, A clutch and a hitch
93 W350 ext cab dually, getrag and a few adjustments
pulltilbroke
14mm rotor
 
Posts: 1410
Joined: Fri Jan 18, 2008 1:20 am
Location: Eagle Ne

Postby IowaCummins » Tue Apr 28, 2009 2:28 pm

i think i have heard the name before but not off teh top of my head. yeah the only 1st gens around here are mostly 2wd and camper haulers and the drivers are retired goign camping. lol but no disrespect towards them. they still have those 1st gens looking reallly good and polished. but yeah mostly virgin pumps around here.
1993 Dodge W250 Reg cab. Auto, .010" headgasket, A1 Studs. Just the Lil Ole VE pump Fuelin 7x.014's turnin the Aurora 3000 turbo. 5" Turbo back to Duals. :cbadge:
IowaCummins
14mm rotor
 
Posts: 522
Joined: Tue Mar 17, 2009 2:16 pm
Location: council bluffs iowa
Top

Postby pulltilbroke » Tue Apr 28, 2009 7:14 pm

Yeah lots of virgin pumps around here, but not mine mines a big ole whore
90 W250 reg cab, Modified knuder valve, reversed reciprocting dinglearm adjusted, High volume flux capacitor,upgraded whirlygig, A clutch and a hitch
93 W350 ext cab dually, getrag and a few adjustments
pulltilbroke
14mm rotor
 
Posts: 1410
Joined: Fri Jan 18, 2008 1:20 am
Location: Eagle Ne
Top

Postby IowaCummins » Tue Apr 28, 2009 8:49 pm

haha yeah mines just a slut for now lol. just a lil full power screw turnin and smoke screw. but i do have the 3200gsk for her sittin on the garage bench. might do a lil grinding on the fuel pin till i get a dennyt II and while im in there do some afc lever grinding as well. put her all back together and hope the 518 will hold it all. she does really good with the current stuff i know that
1993 Dodge W250 Reg cab. Auto, .010" headgasket, A1 Studs. Just the Lil Ole VE pump Fuelin 7x.014's turnin the Aurora 3000 turbo. 5" Turbo back to Duals. :cbadge:
IowaCummins
14mm rotor
 
Posts: 522
Joined: Tue Mar 17, 2009 2:16 pm
Location: council bluffs iowa
Top

Postby pulltilbroke » Tue Apr 28, 2009 11:31 pm

Let me know when you want to put the spring in I'll come up and give ya a hand de flowering your pump :D
90 W250 reg cab, Modified knuder valve, reversed reciprocting dinglearm adjusted, High volume flux capacitor,upgraded whirlygig, A clutch and a hitch
93 W350 ext cab dually, getrag and a few adjustments
pulltilbroke
14mm rotor
 
Posts: 1410
Joined: Fri Jan 18, 2008 1:20 am
Location: Eagle Ne
Top

Postby MMiller » Tue May 05, 2009 7:38 pm

I'm at Lenox Iowa, in SW part of the state. I've got two first gens, ones been quite molested, and ones just been experianced, a little, well maybe not just a little. :shock:

Michael
1993 W250, 3.55, NV5600 , Con O, bosch 185's, 4" exhaust, Super 40, pump tweaks, ground pin, Smokehouse air intake, Hamilton Cam,
1985 D350, Crew Cab, 92 cummins and a 518. 47rh to be built and installed along with 3.55 LS Dana 80
MMiller
fuel screw!!!!
 
Posts: 391
Joined: Mon Jan 08, 2007 6:26 am
Location: Lenox Ia
Top

Postby IowaCummins » Wed May 06, 2009 11:45 am

hey MMiller you dont happen to have a son that goes to iowa school for the deaf do you?
1993 Dodge W250 Reg cab. Auto, .010" headgasket, A1 Studs. Just the Lil Ole VE pump Fuelin 7x.014's turnin the Aurora 3000 turbo. 5" Turbo back to Duals. :cbadge:
IowaCummins
14mm rotor
 
Posts: 522
Joined: Tue Mar 17, 2009 2:16 pm
Location: council bluffs iowa
Top

Postby beerboy81 » Wed May 06, 2009 2:20 pm

i've been to ISD many times for games.. really nice school! their football coach is Kenny Walker and he used to play for the Denver Broncos.. dunno if he's still there but was really cool to meet him.. he wrote a book, "roar of silence" very good!
Jake

'93 W250 LE '92 CTD/IC GETRAG 5sp. 4x4 4" lift 33x15.50x16 TSL/SX Super Swampers, Pumped up, ASA Mods, cooler tubz, 5" stacks.. 366 hiding in the glove box
User avatar
beerboy81
fuel screw!!!!
 
Posts: 75
Joined: Sun Jan 06, 2008 7:36 pm
Location: Chesapeake Bay, VA.
Top

Postby IowaCummins » Wed May 06, 2009 3:25 pm

beerboy81 wrote:i've been to ISD many times for games.. really nice school! their football coach is Kenny Walker and he used to play for the Denver Broncos.. dunno if he's still there but was really cool to meet him.. he wrote a book, "roar of silence" very good!


oh really? huh thats pretty cool. i go to school right across the street from isd and take some classes over there, like metals and woods. it is a really nice school and the teachers are pretty dang cool also
1993 Dodge W250 Reg cab. Auto, .010" headgasket, A1 Studs. Just the Lil Ole VE pump Fuelin 7x.014's turnin the Aurora 3000 turbo. 5" Turbo back to Duals. :cbadge:
IowaCummins
14mm rotor
 
Posts: 522
Joined: Tue Mar 17, 2009 2:16 pm
Location: council bluffs iowa
Top

Postby MMiller » Wed May 06, 2009 3:35 pm

Nope, my son's hearing is perfect, its just that he does no listen so well......

Michael
1993 W250, 3.55, NV5600 , Con O, bosch 185's, 4" exhaust, Super 40, pump tweaks, ground pin, Smokehouse air intake, Hamilton Cam,
1985 D350, Crew Cab, 92 cummins and a 518. 47rh to be built and installed along with 3.55 LS Dana 80
MMiller
fuel screw!!!!
 
Posts: 391
Joined: Mon Jan 08, 2007 6:26 am
Location: Lenox Ia
Top

Postby IowaCummins » Wed May 06, 2009 8:06 pm

haha well thats good/ bad lol. i was just wondering cause a kid i know over there his name is cris and he was tellign me that he had a red 1st gen that had 38" tsl swampers with 8" of lift and twin turbos of soem kind he didnt say. i guess the previous owner did all this stuff. i think he said it put down around 380 horse of somethning like that. i was just reading your sig and kinda put 2 adn 2 together and just was wondering. i think imma tell him to get on here. it would be alot easier talking to him since i dont know a bit of sign language adn not having to go through a translator or pen and paper
1993 Dodge W250 Reg cab. Auto, .010" headgasket, A1 Studs. Just the Lil Ole VE pump Fuelin 7x.014's turnin the Aurora 3000 turbo. 5" Turbo back to Duals. :cbadge:
IowaCummins
14mm rotor
 
Posts: 522
Joined: Tue Mar 17, 2009 2:16 pm
Location: council bluffs iowa
Top

Postby MunK » Thu May 28, 2009 1:42 pm

what pullitbroke i don't count anymore? i am hurt. ;=p

by the end of the summer we shall see who's truck is more "molested"


NoRM
still waiting for a pull schedule
91 W250 Nv4500/3.55
85 W350 Crew Cab (soon to be a 6bt/Nv 4500)
MunK
fuel screw!!!!
 
Posts: 45
Joined: Fri Feb 15, 2008 2:02 pm
Location: YorK County Neb.
Top

Postby pulltilbroke » Thu May 28, 2009 9:15 pm

MunK wrote:what pullitbroke i don't count anymore? i am hurt. ;=p

by the end of the summer we shall see who's truck is more "molested"


NoRM
still waiting for a pull schedule


You'll get over it :D hell your over 100 miles away from IA

These are the hooks that I know of so far this year


Eastern Nebraska dates. These usually hold pretty close to the same weekend as the previous year.
Dorchester (Saline Center?) June 27th
Techumseh NE July 11th
Pierce, NE: July 18th http://www.piercecountyfair.org/
Johnson, NE: July 18th
Malvern, IA July 20th
Westfair, IA July 24th
Springfield, NE: July 31st Sarpy County Fairgrounds
Wahoo, NE: Aug 1st Saunders County Fair - Wahoo, Nebraska, This is one of the best pulls in our area IMO
Pickerell, NE Aug 8th
Adams, NE Aug 15th
There are more, Pawnee city, Falls city, Diller? ......

Random diesel dates of importance.
May 9th 2009 Kearney, NE diesel dyno
June 13-14th 2009 St Joe, MO St Joe's diesel tentative drag, dyno, sled pull weekend. This will be the first year for this event and it is still in the planning stages.
July Platte City, MO (3rd or 4th weekend) http://plattecountyfair.com/ This is a big money pull. Our opportunity to see trucks from Ohio, Indiana, Michigan, Wisconsin, etc....

Local organization that has diesel trucks and gassers. Check out their site for pictures and dates.
http://www.nepowerpullers.com

May 25 Maywood, NE Starts @ 10 AM Contact Lou Workmeister 308-362-4254
March 28th 2009 Broken Bow, NE (great early season pull)
June 15 Valentine, NE will try and get more info later
June 21 Mitchell, NE Starts @ 5 PM street gas & diesel; CTTPA pull @ 7 PM
June 28 Amherst, NE two tracks with NeTPA, Outlaw Minirods, and Diesel Trucks Contact Brian Rumbeck 308-442-2242
July 5 Merna, NE two tracks with antiques and gas and diesel trucks Contact Cherilyn Littel 308-362-9026

Gibbon always has a big truck and tractor pull every year.

Details: http://www.gibbontractorpull.com/

You any closer to gettin the CC back in one piece yet
90 W250 reg cab, Modified knuder valve, reversed reciprocting dinglearm adjusted, High volume flux capacitor,upgraded whirlygig, A clutch and a hitch
93 W350 ext cab dually, getrag and a few adjustments
pulltilbroke
14mm rotor
 
Posts: 1410
Joined: Fri Jan 18, 2008 1:20 am
Location: Eagle Ne
Top


Return to Lounge

Who is online

Users browsing this forum: No registered users and 8 guests