1stGen.org

by **ditchman24** » Tue Sep 15, 2009 7:54 pm

Dose anyone have a part # for head studs that will work on a 91.5? Are they the same as a 94-98? I've called Arp and they can't tell me if they will work. What do I need? It's a stupid question, but I can't seem to get a good awnser out of anyone. Thanks for any input. Woody

by **cummins king** » Tue Sep 15, 2009 7:57 pm

yes the 12v studs from a 94 will be fine.
joel

by **ditchman24** » Tue Sep 15, 2009 8:07 pm

thanks, can't seem to find a vendor that can give me a good awnser. ARP gave the contents, part #, and the length of each stud but could not give me a part # or a yes/no on the 94-98. I've been told but do not want to spend the money without being sure.

by **soggy** » Tue Sep 15, 2009 8:12 pm

12v ARP head studs are all the same, you will need to get the rocker pedestals machined also.

by **BC847** » Tue Sep 15, 2009 8:42 pm

soggy wrote:You will need to get the rocker pedestals machined also.

Not with the A1 kit from Haisley Machine.

by **cummins king** » Tue Sep 15, 2009 9:00 pm

BC847 wrote:
soggy wrote:You will need to get the rocker pedestals machined also.

Not with the A1 kit from Haisley Machine.

ya thats right, thats what i have.

by **fergavs** » Wed Sep 16, 2009 10:29 pm

I have a set of ARP 12V head studs (only state 94-98 on box) and all I had to do was machine/grind the valve covers slightly to make the cover clear the stud. No machining of the rocker pedestals needed. Ill be putting a second set on my 4x4.

by **ditchman24** » Tue Oct 20, 2009 8:06 pm

thanks for the info guys, sorry about the delay.

1stGen.org

head stud?

head stud?

Who is online