1stGen.org

THE place for 1st gens

Skip to content

boost question

How to make it go fast

Moderators: Greenleaf, KTA, BC847, Richie O

Post a reply

Postby RSWORDS » Wed Dec 02, 2009 6:36 pm

slowdiesel wrote:yeah, sorry i need to update my sig. No it is in my twin truck.. I would call BS on a stock injector hx-40 combo also. That one would hit 40-45 and the turbo did not last long!


That I will believe! :lol:
Image
User avatar
RSWORDS
14mm rotor
 
Posts: 820
Joined: Fri Feb 29, 2008 8:00 pm
Top

Postby oldsmokey191 » Fri Dec 04, 2009 9:47 am

mine runs at 30 with a stock turbo and the fuel turned up
oldsmokey191
fuel pin?
 
Posts: 21
Joined: Tue Dec 01, 2009 10:05 am
Location: beallsville md
Top

Postby Firstgen1 » Sat Dec 05, 2009 9:53 am

mide as well say mine, 37lbs on stock turbo and stock non intercooled injectors
1993 w250 pin ground, 3 turns on fuel screw, starwheel maxed, custom intake,4in exhaust, guages, 16cm housing, piston lift pump, dtt converter, shiftkit, 35 psi of boost
User avatar
Firstgen1
fuel screw!!!!
 
Posts: 46
Joined: Tue Apr 14, 2009 7:12 pm
Location: landisburg Pennsylvania
Top

Postby Horus » Wed Dec 09, 2009 8:57 am

20 psi, maybe, while towing a 10K trailer with a luxury ATV on it uphill.

Is that lame?
91.5 W250 Dodge 4X4 CTD. Getrag. DD Power pin removed, stock fuel cone back in. 366 spring. Power screw at stock depth. Stock turbo. Stock lift pump. Straight piped and Intercooled.

93 D250 Dodge club cab 2wd. All stock for now. Automatic.
Hard KOR Wheeler.
PNWJeep club member.
Horus
fuel screw!!!!
 
Posts: 125
Joined: Wed Feb 18, 2009 10:21 am
Location: Washington state
Top

Postby Richie O » Wed Dec 09, 2009 1:57 pm

Horus wrote:20 psi, maybe, while towing a 10K trailer with a luxury ATV on it uphill.

Is that lame?


No. If I had to work my trucks they would be stock also. Stock is good for any work. :)
1989 W250 727, 3.07 L/S, S300, P/S Intercooler, Stans exaust, Pump adjustments, 127k miles,297 hp
1993 W250 extended cab, rag, 4.10 l/s, 6x16's, HTT 62/71/14 piston l/p, Isspro EV series tach, fuel pressure, boost, oil pres, water temp, volt, pryo, 132k/ 301 hp
1992 W250 with NV4500, 3.54's, 16cm 60mm GDS H1C, ground stock cone, Isspro tach, pryo, boost, fuel pressure, slow, rusty, dented,180k
User avatar
Richie O
Administrator
 
Posts: 4171
Joined: Sat May 17, 2008 9:01 pm
Location: New England
Top

Postby 1STGENFARMBOY » Wed Dec 09, 2009 3:01 pm

X2 my truck was so much better to pull with before i cranked everything up.
93 W250 STD CAB, AUTO 3.55, GAUGES, 80HP DDP STICKS, DENNY T ,16CM HOUSING, 60MM GILLETT, VE MAXED,BHAF, BHFF, 366 SPRING,P/S INTERCOOLER, TIMS COOLER TUBS, TIMMING 1/8 BUMP,4in TURBO BACK TO DUEL 5IN STACKS,33 12.50 BFG, HOLLEY BLACK, CONVERTER COOMING.
User avatar
1STGENFARMBOY
14mm rotor
 
Posts: 2089
Joined: Mon Sep 28, 2009 2:23 pm
Location: PITTSBURG ILL
Top

Postby Ace » Wed Dec 09, 2009 3:49 pm

Richie O wrote:...If I had to work my trucks they would be stock also. Stock is good for any work.

1STGENFARMBOY wrote:X2 my truck was so much better to pull with before i cranked everything up.

So true. It takes close to two thousand dollars worth of mods just to cool all the fuel that is available stock. PS I/C, Water/meth, 60mm wheel, exhaust, ATS manifold. At least that is what I found with my truck. I ended up turning the pump down a couple turns by the time I was done.
User avatar
Ace
14mm rotor
 
Posts: 1024
Joined: Thu May 31, 2007 2:10 am
Location: CO
Top
Previous
Post a reply

Return to The good stuff

Who is online

Users browsing this forum: No registered users and 52 guests

Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
cron