just curious....

How the engine works

Moderators: Greenleaf, KTA, BC847, Richie O

just curious....

Postby revemup15 » Sat Feb 11, 2012 8:30 pm

What's the Max HP someone can get out if a non ic truck before they would need to intercool it? Thanks
89 w250 14mm h/r in the works, aeromotive, 63/68 coming soon
94 p-pump
revemup15
Banned
 
Posts: 392
Joined: Mon Jun 06, 2011 6:23 pm

Re: just curious....

Postby Kasper Cummins » Sat Feb 11, 2012 9:18 pm

With the stock turbo or any turbo, on just fuel or on the bottle?
92 W250 club cab

Kasper Performance Fabrication
Kasper Cummins
fuel screw!!!!
 
Posts: 163
Joined: Mon May 09, 2011 7:14 pm
Location: Sauk Center, MN

Re: just curious....

Postby revemup15 » Sat Feb 11, 2012 9:24 pm

Any Turbo and just fuel
89 w250 14mm h/r in the works, aeromotive, 63/68 coming soon
94 p-pump
revemup15
Banned
 
Posts: 392
Joined: Mon Jun 06, 2011 6:23 pm
Top

Re: just curious....

Postby Kasper Cummins » Sat Feb 11, 2012 9:44 pm

Well an intercooler reduces EGTs. So as long as your turbo can move enough air to keep your pistons from melting you are only limited by how much fuel they flow.

I seen some where 300hp is doable with a stockish setup.
92 W250 club cab

Kasper Performance Fabrication
Kasper Cummins
fuel screw!!!!
 
Posts: 163
Joined: Mon May 09, 2011 7:14 pm
Location: Sauk Center, MN
Top

Re: just curious....

Postby revemup15 » Sat Feb 11, 2012 9:45 pm

So if I had a Hx40 I could hit around 400?
89 w250 14mm h/r in the works, aeromotive, 63/68 coming soon
94 p-pump
revemup15
Banned
 
Posts: 392
Joined: Mon Jun 06, 2011 6:23 pm
Top

Re: just curious....

Postby peobryant » Sun Feb 12, 2012 1:04 am

revemup15 wrote:So if I had a Hx40 I could hit around 400?


I doubt you could hit that without an intercooler. Maybe if it was just a dyno queen it may be able to hit 400rwhp (again, I still doubt it) but for a daily driver and especially if it will be towing anything you'll need an intercooler.
Parker
1991 Dodge Ram D350, Cummins Turbo Diesel, A518
1972 Mercedes-Benz 220D, OM615 Diesel, 4 Speed Manual
User avatar
peobryant
14mm rotor
 
Posts: 1946
Joined: Thu Dec 27, 2007 1:07 am
Location: Goshen, Ky
Top

Re: just curious....

Postby revemup15 » Sun Feb 12, 2012 4:00 am

Ill never do any towing hell I never will even pull a fat girl off a cheese burger
89 w250 14mm h/r in the works, aeromotive, 63/68 coming soon
94 p-pump
revemup15
Banned
 
Posts: 392
Joined: Mon Jun 06, 2011 6:23 pm
Top

Re: just curious....

Postby ellis93 » Sun Feb 12, 2012 4:44 am

That's funny :lol:
93 D250 ,5 speed,4.11s,k&n autometer tach pyro trans boost guages,GDS 60mm h1c 14cm,honed 5x10,hplp/reg,1/8 timing,M+H M2 fuel pin, tims cooler tubz
User avatar
ellis93
14mm rotor
 
Posts: 7762
Joined: Wed Feb 17, 2010 3:16 pm
Location: lucedale,mississippi
Top

Re: just curious....

Postby CumminsPower59 » Sun Feb 12, 2012 4:54 am

:lol:
Ike

91 W350 SRW, 3.07's, NV4500, 370's, THD LPPP, Super HX40, 2nd gen IC swap, BHAF, Isspro's, 2" lift, 285's on 3rd gen 17"'s.
04 VW Jetta Wagon TDI 5speed
CumminsPower59
14mm rotor
 
Posts: 3203
Joined: Mon Feb 25, 2008 8:04 am
Location: The Hawkeye State of 'Murica!
Top

Re: just curious....

Postby oldestof11 » Sun Feb 12, 2012 7:23 am

Intercooling helps reduce the hot air being pushed out of your turbo. It helps at making the air more oxygen dense so it burns better in the cylinder. If you don't and you hit 400, a good sized cooler may help you to break 440...
Jon
93 D250~ Mismatch of cheap parts, trying to look fast going slow
User avatar
oldestof11
14mm rotor
 
Posts: 4147
Joined: Tue Apr 24, 2007 4:46 pm
Location: Northern Illinois
Top

Re: just curious....

Postby revemup15 » Sun Feb 12, 2012 7:50 am

Does any have a intercooler and pipes for sale?
89 w250 14mm h/r in the works, aeromotive, 63/68 coming soon
94 p-pump
revemup15
Banned
 
Posts: 392
Joined: Mon Jun 06, 2011 6:23 pm
Top

Re: just curious....

Postby revemup15 » Mon Feb 13, 2012 12:37 pm

Is there any benefits to making a 3in crossover pipe?
89 w250 14mm h/r in the works, aeromotive, 63/68 coming soon
94 p-pump
revemup15
Banned
 
Posts: 392
Joined: Mon Jun 06, 2011 6:23 pm
Top

Re: just curious....

Postby BILTIT » Mon Feb 13, 2012 12:46 pm

Where are you located? I have stock intercooler, piping and H1C turbo off a 91.5 available.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top

Re: just curious....

Postby revemup15 » Mon Feb 13, 2012 12:57 pm

How much shipped to Indiana.... don't want the Turbo.... just all the pipes boots and intercooler.... zipcode is 47424
89 w250 14mm h/r in the works, aeromotive, 63/68 coming soon
94 p-pump
revemup15
Banned
 
Posts: 392
Joined: Mon Jun 06, 2011 6:23 pm
Top

Re: just curious....

Postby BILTIT » Mon Feb 13, 2012 3:16 pm

Probably too much, the intercooler wont be cheap to ship but i will look into it.
Derek B.
2003 QuadCab, Tater 62/65 341cw, Smarty Touch SW9, Full Billet trans.
91.5 W250, coolertubz, HE351CW, PS IC, Alcans, GVOD, Valair DD, bags, crossover.
1974 Pontiac Ventura,best of 11.97 at 112 so far.
Aluminum heads and roller cam on the way.
User avatar
BILTIT
14mm rotor
 
Posts: 711
Joined: Wed Aug 11, 2010 1:29 pm
Location: Lloydminster, Saskatchewan
Top


Return to Engine

Who is online

Users browsing this forum: No registered users and 13 guests