Lots of info here on this forum I just need a little more help! After poking around aimlessly for awhile I found a broken wire inside the sheathing where it comes out of the Y connectore to all the fusible links it was the orange wire and it had a white wire tied into it.On the other side of the link it s a solid red wire that feeds into the junction on the firewall. So to confirm if this was the cause of the no start I cut the wire back and touched it back together, and the truck turned over, so I reconected the wire ,tried again and the link went up in smoke,I then went to the parts store and got an inline fuse holder and a 40 amp fuse, blew the fuse.Every time I turn the key it blows the darn fuse.I know there is a dead short someplace just would like some guidance where to start looking? I have had the truck for about 5 yrs, and there is evidence of an underhood fire sometime in its past before I got it, other than the headlight switch and the cruise not working anymore it has been a good ol truck..but the past fire evidence makes me think it could be anything... What I dont get is that I got it to start cranking, and now it just kills the fuse...any ideas or help greatly appreciated! Oh yeah its a 2wd automatic trans.
Steve